ddlnew

DDLs for the Post Upgrade Forward Tracker Calibration Banks

Last update 30/10/2002 SJM:

A text version of the calibration bank DDL's can be found here
A text version of the monitoring bank DDL's can be found here

There are three types of banks involved:-
                        a) 'Calibration banks' - FxCy
                                                                 FPCT, FPCV, FPCK, FPCR, FPCD, FPCB, FPCE, FPCA
                                                                 FQCT, FQCV, FQCK, FQCR, FQCD, FQCB, FQCE, FQCA
FPCH, FPCW
   FQCH, FQCW
These banks contain run-dependent parameters or sets of parameters and are the banks
                              used by the reconstruction program ,

                        b) 'Monitoring banks' - FxMy                              Concatenated versions
                                                                     FPMO   (=FPMT+FPMV+FPMK+FPMF+FPMR+FPMD),
                                                                     FQMO  (=FQMT+FQMV+FQMK+FQMF+FQMR+FQMD),
                                                                     FTMO,
                                                                                       (Obsolete separated versions - do not use
                                                                     FPMT, FPMV, FPMK, FPMR, FPMD, FPMB, FPME, FPMA
                                                                     FQMT, FQMV, FQMK, FQMR, FQMD, FQMB, FQME, FQMA
   FPMF, FQMF

   FTMM )

                             These banks are generated by the monitoring software from the analysis of online histograms.
                             One of each for per run. The banks are of type LOGRUN. They are the equivalent of the
                             history n-tuples used in the old off-line analysis and contain information needed to detect
                             significant changes in the calibrated quantities and trigger the update of the calibration banks.

c) 'Steering banks' FPCA, FQCA

Contain constants needed to steer the calibration procedure and/or the time to distance function.

Calibration banks

NB These banks are run-dependent

Old Planar Chambers

!       BANKname BANKtype     !Comments
!
TABLE FPCT                   ! Forward Planar Calibration t0
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   TZERO               F -INF   +INF    ! Global t0 (ns)

!       BANKname BANKtype     !Comments
!
TABLE FPCV                   ! Forward Planar Calibration velocity
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   VAV                   F -INF   +INF    ! Global <v> (microns/ns)

      BANKname BANKtype     !Comments
!
TABLE FPCB                   ! Forward Planar Calibration Beta parameters
                                             !
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      beta asymmetrys at the wire and 3 knot points
1   BETA0               F -INF   +INF    ! Beta asymmetry at wire
2   BETA 1              F -INF   +INF    ! Beta asymmetry at 1st knot point
3   BETA 2              F -INF   +INF    ! Beta asymmetry at 2nd knot point
4   BETA 3              F -INF   +INF    ! Beta asymmetry at 3rd knot point
5   STAGGE            F -INF   +INF    ! effective stagger (microns)

       BANKname BANKtype     !Comments
!
TABLE FPCK                   ! Forward Planar Calibration t-to-d
                                             ! Global time to distance parameters
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   R0                F -INF   +INF    ! velocity ratio at knot 0
2   R1                F -INF   +INF    ! velocity ratio at knot 1
3   R2                F -INF   +INF    ! velocity ratio at knot 2
4   R3                F -INF   +INF    ! velocity ratio at knot 3
!
5   X1                F -INF   +INF    ! location of knot 1 (microns)
6   X2                F -INF   +INF    ! location of knot 2 (microns)
7   X3                F -INF   +INF    ! location of knot 3 (microns)
!
!

     BANKname BANKtype     !Comments
!
TABLE FPCR                   ! Forward Planar Calibration t-to-d
                                             ! wire-plane-by-wire-plane
                                             ! time to distance parameters
                                             ! Velocity ratio wrt <v> from FPCV bank
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      wire-plane 0
1   R00                F -INF   +INF    ! velocity ratio at knot 0
2   R01                F -INF   +INF    ! velocity ratio at knot 1
3   R02                F -INF   +INF    ! velocity ratio at knot 2
4   R03                F -INF   +INF    ! velocity ratio at knot 3
!
5   X01                F -INF   +INF    ! location of knot 1 (microns)
6   X02                F -INF   +INF    ! location of knot 2 (microns)
7   X03                F -INF   +INF    ! location of knot 3 (microns)
!
!      wire-plane 1
8   R10                F -INF   +INF    ! velocity ratio at knot 0
9   R11                F -INF   +INF    ! velocity ratio at knot 1
10   R12                F -INF   +INF    ! velocity ratio at knot 2
11   R13                F -INF   +INF    ! velocity ratio at knot 3
!
12   X11                F -INF   +INF    ! location of knot 1 (microns)
13   X12                F -INF   +INF    ! location of knot 2 (microns)
14   X13                F -INF   +INF    ! location of knot 3 (microns)
!
!      wire-plane 2
15   R20                F -INF   +INF    ! velocity ratio at knot 0
16   R21                F -INF   +INF    ! velocity ratio at knot 1
17   R22                F -INF   +INF    ! velocity ratio at knot 2
18   R23                F -INF   +INF    ! velocity ratio at knot 3
!
19   X21                F -INF   +INF    ! location of knot 1 (microns)
20   X22                F -INF   +INF    ! location of knot 2 (microns)
21   X23                F -INF   +INF    ! location of knot 3 (microns)
!
!      wire-plane 3
22   R30                F -INF   +INF    ! velocity ratio at knot 0
23   R31                F -INF   +INF    ! velocity ratio at knot 1
24   R32                F -INF   +INF    ! velocity ratio at knot 2
25   R33                F -INF   +INF    ! velocity ratio at knot 3
!
26   X31                F -INF   +INF    ! location of knot 1 (microns)
27   X32                F -INF   +INF    ! location of knot 2 (microns)
28   X33                F -INF   +INF    ! location of knot 3 (microns)
!

      BANKname BANKtype     !Comments
!
TABLE FPCD                   ! Forward Planar Calibration t0s
                                             ! wire-by-wire
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      Delta-t0's on wires 0-3 (relative to global t0 in FPCT bank)
1   DTZ0                F -INF   +INF    ! t zero on wire-plane 0 (ns)
2   DTZ1                F -INF   +INF    ! t zero on wire-plane 1 (ns)
3   DTZ2                F -INF   +INF    ! t zero on wire-plane 2 (ns)
4   DTZ3                F -INF   +INF    ! t zero on wire-plane 3 (ns)

      BANKname BANKtype     !Comments
!
TABLE FPCE                   ! Forward Planar Calibration resolution
                                             !parameters
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
! err = sqrt(e0**2 + d*e1**2 + e2**2 * exp(-e3*d) )
!   N.B. gives error in microns when d is drift in cms!
!
    1   ERRD00              F -INF   +INF     ! microns
    2   ERRD01              F -INF   +INF     ! microns/sqrt(cms)
    3   ERRD02              F -INF   +INF     ! microns
    4   ERRD03              F -INF   +INF     ! cm**-1

    5   ERRD10              F -INF   +INF     !
    6   ERRD11              F -INF   +INF     !
    7   ERRD12              F -INF   +INF     ! wire-plane 1
    8   ERRD13              F -INF   +INF     !

    9   ERRD20              F -INF   +INF     !
10   ERRD21              F -INF   +INF     !
11   ERRD22              F -INF   +INF     ! wire-plane 2
12   ERRD23              F -INF   +INF     !

13   ERRD30              F -INF   +INF     !
14   ERRD31              F -INF   +INF     !
15   ERRD32              F -INF   +INF     ! wire-plane 3
16   ERRD33              F -INF   +INF     !

!       BANKname BANKtype     !Comments
!
TABLE FPCA                   ! Forward Planar Calibration steering
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   DRMAX               F -INF   +INF    ! maximum alowed drift (cms)
2   TBMIN                 F -INF   +INF    ! minimum allowed drift time(ns)
3   DTANGP              F -INF   +INF    ! isochrone radius for track angle
                                                                 ! correction (cms)

! BANKname BANKtype !Comments
!
TABLE FPCH ! Forward P chamber channel re-mapping bank.
! ! QT version.
!
! S, J, Maxfield
!
! ATTributes:
! -----------
! COL ATT-name FMT Min Max !Comments
!
1 ISWP I 0 1151 ! swap channel

! BANKname BANKtype !Comments
!
TABLE FPCW ! Forward P chamber channel re-mapping bank.
! ! FTREC version.
!
! S, J, Maxfield
!
! ATTributes:
! -----------
! COL ATT-name FMT Min Max !Comments
!
1 ISWP I 0 1151 ! swap channel

New Planar Chambers

!       BANKname BANKtype     !Comments
!
TABLE FQCT                   ! Forward Planar Calibration t0
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   Tzero                 F -INF   +INF    ! Global t0 (ns)

!       BANKname BANKtype     !Comments
!
TABLE FQCV                   ! Forward Planar Calibration velocity
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
1   Vav                F -INF   +INF    ! Global <v> (microns/ns)

       BANKname BANKtype     !Comments
!
TABLE FQCK                   ! Forward Planar Calibration t-to-d
                                             ! Global time to distance parameters
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
1   R0                F -INF   +INF    ! velocity ratio at knot 0
2   R1                F -INF   +INF    ! velocity ratio at knot 1
3   R2                F -INF   +INF    ! velocity ratio at knot 2
4   R3                F -INF   +INF    ! velocity ratio at knot 3
!
5   X1                F -INF   +INF    ! location of knot 1 (microns)
6   X2                F -INF   +INF    ! location of knot 2 (microns)
7   X3                F -INF   +INF    ! location of knot 3 (microns)
!
!

     BANKname BANKtype     !Comments
!
TABLE FQCR                   ! Forward Planar Calibration t-to-d
                                             ! wire-by-wire time to distance parameters
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      wire-plane 0
1   R00                F -INF   +INF    ! velocity ratio at knot 0
2   R01                F -INF   +INF    ! velocity ratio at knot 1
3   R02                F -INF   +INF    ! velocity ratio at knot 2
4   R03                F -INF   +INF    ! velocity ratio at knot 3
!
5   X01                F -INF   +INF    ! location of knot 1(microns)
6   X02                F -INF   +INF    ! location of knot 2(microns)
7   X03                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 1
8   R10                F -INF   +INF    ! velocity ratio at knot 0
9   R11                F -INF   +INF    ! velocity ratio at knot 1
10   R12                F -INF   +INF    ! velocity ratio at knot 2
11   R13                F -INF   +INF    ! velocity ratio at knot 3
!
12   X11                F -INF   +INF    ! location of knot 1(microns)
13   X12                F -INF   +INF    ! location of knot 2(microns)
14   X13                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 2
15   R20                F -INF   +INF    ! velocity ratio at knot 0
16   R21                F -INF   +INF    ! velocity ratio at knot 1
17   R22                F -INF   +INF    ! velocity ratio at knot 2
18   R23                F -INF   +INF    ! velocity ratio at knot 3
!
19   X21                F -INF   +INF    ! location of knot 1(microns)
20   X22                F -INF   +INF    ! location of knot 2(microns)
21   X23                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 3
22   R30                F -INF   +INF    ! velocity ratio at knot 0
23   R31                F -INF   +INF    ! velocity ratio at knot 1
24   R32                F -INF   +INF    ! velocity ratio at knot 2
25   R33                F -INF   +INF    ! velocity ratio at knot 3
!
26   X31                F -INF   +INF    ! location of knot 1(microns)
27   X32                F -INF   +INF    ! location of knot 2(microns)
28   X33                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 4
29   R40                F -INF   +INF    ! velocity ratio at knot 0
30   R41                F -INF   +INF    ! velocity ratio at knot 1
31   R42                F -INF   +INF    ! velocity ratio at knot 2
32   R43                F -INF   +INF    ! velocity ratio at knot 3
!
33   X41                F -INF   +INF    ! location of knot 1(microns)
34   X42                F -INF   +INF    ! location of knot 2(microns)
35   X43                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 5
36   R50                F -INF   +INF    ! velocity ratio at knot 0
37   R51                F -INF   +INF    ! velocity ratio at knot 1
38   R52                F -INF   +INF    ! velocity ratio at knot 2
39   R53                F -INF   +INF    ! velocity ratio at knot 3
!
40   X51                F -INF   +INF    ! location of knot 1(microns)
41   X52                F -INF   +INF    ! location of knot 2(microns)
42   X53                F -INF   +INF    ! location of knot 3(microns)
!
!
!      wire-plane 6
43   R60                F -INF   +INF    ! velocity ratio at knot 0
44   R61                F -INF   +INF    ! velocity ratio at knot 1
45   R62                F -INF   +INF    ! velocity ratio at knot 2
46   R63                F -INF   +INF    ! velocity ratio at knot 3
!
47   X61                F -INF   +INF    ! location of knot 1(microns)
48   X62                F -INF   +INF    ! location of knot 2(microns)
49   X63                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 7
50   R70                F -INF   +INF    ! velocity ratio at knot 0
51   R71                F -INF   +INF    ! velocity ratio at knot 1
52 R72                 F -INF   +INF    ! velocity ratio at knot 2
53   R73                F -INF   +INF    ! velocity ratio at knot 3
!
54   X71                F -INF   +INF    ! location of knot 1(microns)
55   X72                F -INF   +INF    ! location of knot 2(microns)
56   X73                F -INF   +INF    ! location of knot 3(microns)
!

      BANKname BANKtype     !Comments
!
TABLE FQCD                   ! Forward Planar Calibration t0s
                                             ! wire-by-wire
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      Delta t0's on wires 0-7 (relative to t0 in FQCT bank)
1   DTZ0                F -INF   +INF    ! t zero on wire-plane 0 (ns)
2   DTZ1                F -INF   +INF    ! t zero on wire-plane 1 (ns)
3   DTZ2                F -INF   +INF    ! t zero on wire-plane 2 (ns)
4   DTZ3                F -INF   +INF    ! t zero on wire-plane 3 (ns)
5   DTZ4                F -INF   +INF    ! t zero on wire-plane 4 (ns)
6   DTZ5                F -INF   +INF    ! t zero on wire-plane 5 (ns)
7   DTZ6                F -INF   +INF    ! t zero on wire-plane 6 (ns)
8   DTZ7                F -INF   +INF    ! t zero on wire-plane 7 (ns)

      BANKname BANKtype     !Comments
!
TABLE FQCB                   ! Forward Planar Calibration Beta parameters
                                             !
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      beta asymmetrys at the wire and 3 knot points
1   BETA0               F -INF   +INF    ! Beta asymmetry at wire
2   BETA 1              F -INF   +INF    ! Beta asymmetry at 1st knot point
3   BETA 2              F -INF   +INF    ! Beta asymmetry at 2nd knot point
4   BETA 3              F -INF   +INF    ! Beta asymmetry at 3rd knot point
5   STAGGE            F -INF   +INF    ! effective stagger (microns)

      BANKname BANKtype     !Comments
!
TABLE FQCE                   ! Forward Planar Calibration resolution
                                             !parameters
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
! err = sqrt(e0**2 + d*e1**2 + e2**2 * exp(-e3*d) )
! N.B. gives error in microns when d is drift in cms!
!
    1   ERRD00              F -INF   +INF     ! microns
    2   ERRD01              F -INF   +INF     ! mcrons / sqrt(cm)
    3   ERRD02              F -INF   +INF     ! micrond
    4   ERRD03              F -INF   +INF     ! cm**-1

    5   ERRD10              F -INF   +INF     !
    6   ERRD11              F -INF   +INF     ! as above
    7   ERRD12              F -INF   +INF     ! wire-plane 1
    8   ERRD13              F -INF   +INF     !

    9   ERRD20              F -INF   +INF     !
10   ERRD21              F -INF   +INF     !
11   ERRD22              F -INF   +INF     ! wire-plane 2
12   ERRD23              F -INF   +INF     !

13   ERRD30              F -INF   +INF     !
14   ERRD31              F -INF   +INF     !
15   ERRD32              F -INF   +INF     ! wire-plane 3
16   ERRD33              F -INF   +INF     !

17   ERRD40              F -INF   +INF     !
18   ERRD41              F -INF   +INF     !
19   ERRD42              F -INF   +INF     ! wire-plane 4
20   ERRD43              F -INF   +INF     !

21   ERRD50              F -INF   +INF     !
22   ERRD51              F -INF   +INF     !
23   ERRD52              F -INF   +INF     ! wire-plane 5
24   ERRD53              F -INF   +INF     !

25   ERRD60              F -INF   +INF     !
26   ERRD61              F -INF   +INF     !
27   ERRD62              F -INF   +INF     ! wire-plane 6
28   ERRD63              F -INF   +INF     !

29   ERRD70              F -INF   +INF     !
30   ERRD71              F -INF   +INF     !
31   ERRD72              F -INF   +INF     ! wire-plane 7
32   ERRD73              F -INF   +INF     !

!       BANKname BANKtype     !Comments
!
TABLE FQCA                   ! Forward Planar Calibration steering
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   DRMAX               F -INF   +INF    ! maximum alowed drift (cms)
2   TBMIN                 F -INF   +INF    ! minimum allowed drift time (ns)
3   DTANGP              F -INF    +INF    ! parameter for track angle correction
                                                                 ! isochrone radius (cms)

! BANKname BANKtype !Comments
!
TABLE FQCH ! Forward Q chamber channel re-mapping bank.
! ! version used by QT
!
! S. J. Maxfield
!
! ATTributes:
! -----------
! COL ATT-name FMT Min Max !Comments
!
1 ISWP I 0 1119 ! swap channel

! BANKname BANKtype !Comments
!
TABLE FQCW ! Forward Q chamber channel re-mapping bank.
! ! FTREC version.
!
! S. J. Maxfield
!
! ATTributes:
! -----------
! COL ATT-name FMT Min Max !Comments
!
1 ISWP I 0 1119 ! swap channel

Monitoring banks

!       BANKname BANKtype     !Comments
!
TABLE FPMT                   ! Forward Planar Monitoring t0
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   TZERO               F -INF   +INF    ! Global t0 (ns)
2   DTZER               F -INF   +INF    ! Error on Global t0 (ns)

!       BANKname BANKtype     !Comments
!
TABLE FPMV                   ! Forward Planar Monitoring velocity
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   VAV                   F -INF   +INF    ! Global <v> (microns/ns)
2 DVAV                 F -INF   +INF    ! Error on Global <v> (microns/ns)

       BANKname BANKtype     !Comments
!
TABLE FPMK                   ! Forward Planar Monitoring t-to-d
                                             ! Global time to distance parameters
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   R0                F -INF   +INF    ! velocity ratio at knot 0
2   R1                F -INF   +INF    ! velocity ratio at knot 1
3   R2                F -INF   +INF    ! velocity ratio at knot 2
4   R3                F -INF   +INF    ! velocity ratio at knot 3
!
5   X1                F -INF   +INF    ! location of knot 1 (microns)
6   X2                F -INF   +INF    ! location of knot 2 (microns)
7   X3                F -INF   +INF    ! location of knot 3 (microns)
!
! Errors
!
8 ER0                F -INF   +INF    ! error on velocity ratio at knot 0
9 ER1                F -INF   +INF    ! error on velocity ratio at knot 1
10 ER2                F -INF   +INF    ! error on velocity ratio at knot 2
11 ER3                F -INF   +INF    ! velocity ratio at knot 3
!
12 EX1                F -INF   +INF    ! error on location of knot 1 (microns)
13   EX2                F -INF   +INF    ! error on location of knot 2 (microns)
14 EX3                F -INF   +INF    ! error on location of knot 3 (microns)
!
!

     BANKname BANKtype     !Comments
!
TABLE FPMR                  ! Forward Planar Monitoring t-to-d
                                             ! wire-plane-by-wire-plane
                                             ! time to distance parameters
                                             ! Velocity ratio wrt <v> from FPCV bank
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      wire-plane 0
1   R00                F -INF   +INF    ! velocity ratio at knot 0
2   R01                F -INF   +INF    ! velocity ratio at knot 1
3   R02                F -INF   +INF    ! velocity ratio at knot 2
4   R03                F -INF   +INF    ! velocity ratio at knot 3
!
5   X01                F -INF   +INF    ! location of knot 1 (microns)
6   X02                F -INF   +INF    ! location of knot 2 (microns)
7   X03                F -INF   +INF    ! location of knot 3 (microns)
!
!      wire-plane 1
8   R10                F -INF   +INF    ! velocity ratio at knot 0
9   R11                F -INF   +INF    ! velocity ratio at knot 1
10   R12                F -INF   +INF    ! velocity ratio at knot 2
11   R13                F -INF   +INF    ! velocity ratio at knot 3
!
12   X11                F -INF   +INF    ! location of knot 1 (microns)
13   X12                F -INF   +INF    ! location of knot 2 (microns)
14   X13                F -INF   +INF    ! location of knot 3 (microns)
!
!      wire-plane 2
15   R20                F -INF   +INF    ! velocity ratio at knot 0
16   R21                F -INF   +INF    ! velocity ratio at knot 1
17   R22                F -INF   +INF    ! velocity ratio at knot 2
18   R23                F -INF   +INF    ! velocity ratio at knot 3
!
19   X21                F -INF   +INF    ! location of knot 1 (microns)
20   X22                F -INF   +INF    ! location of knot 2 (microns)
21   X23                F -INF   +INF    ! location of knot 3 (microns)
!
!      wire-plane 3
22   R30                F -INF   +INF    ! velocity ratio at knot 0
23   R31                F -INF   +INF    ! velocity ratio at knot 1
24   R32                F -INF   +INF    ! velocity ratio at knot 2
25   R33                F -INF   +INF    ! velocity ratio at knot 3
!
26   X31                F -INF   +INF    ! location of knot 1 (microns)
27   X32                F -INF   +INF    ! location of knot 2 (microns)
28   X33                F -INF   +INF    ! location of knot 3 (microns)
!
!
! Errors
!
!      wire-plane 0
29 ER00                F -INF   +INF    ! error on velocity ratio at knot 0
30 ER01                F -INF   +INF    ! error on velocity ratio at knot 1
31 ER02                F -INF   +INF    ! error on velocity ratio at knot 2
32 ER03                F -INF   +INF    ! error on velocity ratio at knot 3
!
33 EX01                F -INF   +INF    ! error on location of knot 1 (microns)
34 EX02                F -INF   +INF    ! error on location of knot 2 (microns)
35 EX03                F -INF   +INF    ! error on location of knot 3 (microns)
!
!      wire-plane 1
36 ER10                F -INF   +INF    ! error on velocity ratio at knot 0
37 ER11                F -INF   +INF    ! error on velocity ratio at knot 1
38 ER12                F -INF   +INF    ! error on velocity ratio at knot 2
39 ER13                F -INF   +INF    ! error on velocity ratio at knot 3

!
40 EX11                F -INF   +INF    ! error on location of knot 1 (microns)
41 EX12                F -INF   +INF    ! error on location of knot 2 (microns)
42 EX13                F -INF   +INF    ! error on location of knot 3 (microns)
!
!      wire-plane 2
43 ER20                F -INF   +INF    ! error on velocity ratio at knot 0
44 ER21                F -INF   +INF    ! error on velocity ratio at knot 1
45 ER22                F -INF   +INF    ! error on velocity ratio at knot 2
46 ER23                F -INF   +INF    ! error on velocity ratio at knot 3
!
47 EX21                F -INF   +INF    ! error on location of knot 1 (microns)
48 EX22                F -INF   +INF    ! error on location of knot 2 (microns)
49 EX23                F -INF   +INF    ! error on location of knot 3 (microns)
!
!      wire-plane 3
50 ER30                F -INF   +INF    ! error on velocity ratio at knot 0
51 ER31                F -INF   +INF    ! error on velocity ratio at knot 1
52 ER32                F -INF   +INF    ! error on velocity ratio at knot 2
53 ER33                F -INF   +INF    ! error on velocity ratio at knot 3
!
54 EX31                F -INF   +INF    ! error on location of knot 1 (microns)
55 EX32                F -INF   +INF    ! error on location of knot 2 (microns)
56 EX33                F -INF   +INF    ! error on location of knot 3 (microns)
!

      BANKname BANKtype     !Comments
!
TABLE FPMD                   ! Forward Planar Monitoring t0s
                                             ! wire-by-wire
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      Delta-t0's on wires 0-3 (relative to global t0 in FPCT bank)
1   DTZ0                F -INF   +INF    ! Del t zero on wire-plane 0 (ns)
2   DTZ1                F -INF   +INF    ! Del t zero on wire-plane 1 (ns)
3   DTZ2                F -INF   +INF    ! Del t zero on wire-plane 2 (ns)
4   DTZ3                F -INF   +INF    ! Del t zero on wire-plane 3 (ns)

!      Errors on t0's of the wires
5   EDTZ0                F -INF   +INF    ! error on t zero on wire-plane 0 (ns)
6   EDTZ1                F -INF   +INF    ! error on t zero on wire-plane 1 (ns)
7   EDTZ2                F -INF   +INF    ! error on t zero on wire-plane 2 (ns)
8   EDTZ3                F -INF   +INF    ! error on t zero on wire-plane 3 (ns)

      BANKname BANKtype     !Comments
!
!       BANKname BANKtype     !Comments
!
TABLE FQMT                   ! Forward Planar Monitoring t0
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!
1   Tzero                 F -INF   +INF    ! Global t0 (ns)
2   DTzero              F -INF   +INF    ! Error on Global t0 (ns)

!       BANKname BANKtype     !Comments
!
TABLE FQMV                   ! Forward Planar Monitoring velocity
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
1   Vav                F -INF   +INF    ! Global <v> (microns/ns)
2   DVav             F -INF   +INF    ! Error on Global <v> (microns/ns)

       BANKname BANKtype     !Comments
!
TABLE FQMK                   ! Forward Planar Monitoring t-to-d
                                             ! Global time to distance parameters
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
1   R0                F -INF   +INF    ! velocity ratio at knot 0
2   R1                F -INF   +INF    ! velocity ratio at knot 1
3   R2                F -INF   +INF    ! velocity ratio at knot 2
4   R3                F -INF   +INF    ! velocity ratio at knot 3
!
5   X1                F -INF   +INF    ! location of knot 1 (microns)
6   X2                F -INF   +INF    ! location of knot 2 (microns)
7   X3                F -INF   +INF    ! location of knot 3 (microns)
!

8 ER0                F -INF   +INF    ! error on velocity ratio at knot 0
9 ER1                F -INF   +INF    ! error on velocity ratio at knot 1
10 ER2                F -INF   +INF    ! error on velocity ratio at knot 2
11 ER3                F -INF   +INF    ! error on velocity ratio at knot 3
!
12 EX1                F -INF   +INF    !error on location of knot 1 (microns)
13 EX2                F -INF   +INF    ! error on location of knot 2 (microns)
14 EX3                F -INF   +INF    ! error on location of knot 3 (microns)
!

     BANKname BANKtype     !Comments
!
TABLE FQMR                   ! Forward Planar Monitoring t-to-d
                                             ! wire-by-wire time to distance parameters
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      wire-plane 0
1   R00                F -INF   +INF    ! velocity ratio at knot 0
2   R01                F -INF   +INF    ! velocity ratio at knot 1
3   R02                F -INF   +INF    ! velocity ratio at knot 2
4   R03                F -INF   +INF    ! velocity ratio at knot 3
!
5   X01                F -INF   +INF    ! location of knot 1(microns)
6   X02                F -INF   +INF    ! location of knot 2(microns)
7   X03                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 1
8   R10                F -INF   +INF    ! velocity ratio at knot 0
9   R11                F -INF   +INF    ! velocity ratio at knot 1
10   R12                F -INF   +INF    ! velocity ratio at knot 2
11   R13                F -INF   +INF    ! velocity ratio at knot 3
!
12   X11                F -INF   +INF    ! location of knot 1(microns)
13   X12                F -INF   +INF    ! location of knot 2(microns)
14   X13                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 2
15   R20                F -INF   +INF    ! velocity ratio at knot 0
16   R21                F -INF   +INF    ! velocity ratio at knot 1
17   R22                F -INF   +INF    ! velocity ratio at knot 2
18   R23                F -INF   +INF    ! velocity ratio at knot 3
!
19   X21                F -INF   +INF    ! location of knot 1(microns)
20   X22                F -INF   +INF    ! location of knot 2(microns)
21   X23                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 3
22   R30                F -INF   +INF    ! velocity ratio at knot 0
23   R31                F -INF   +INF    ! velocity ratio at knot 1
24   R32                F -INF   +INF    ! velocity ratio at knot 2
25   R33                F -INF   +INF    ! velocity ratio at knot 3
!
26   X31                F -INF   +INF    ! location of knot 1(microns)
27   X32                F -INF   +INF    ! location of knot 2(microns)
28   X33                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 4
29   R40                F -INF   +INF    ! velocity ratio at knot 0
30   R41                F -INF   +INF    ! velocity ratio at knot 1
31   R42                F -INF   +INF    ! velocity ratio at knot 2
32   R43                F -INF   +INF    ! velocity ratio at knot 3
!
33   X41                F -INF   +INF    ! location of knot 1(microns)
34   X42                F -INF   +INF    ! location of knot 2(microns)
35   X43                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 5
36   R50                F -INF   +INF    ! velocity ratio at knot 0
37   R51                F -INF   +INF    ! velocity ratio at knot 1
38   R52                F -INF   +INF    ! velocity ratio at knot 2
39   R53                F -INF   +INF    ! velocity ratio at knot 3
!
40   X51                F -INF   +INF    ! location of knot 1(microns)
41   X52                F -INF   +INF    ! location of knot 2(microns)
42   X53                F -INF   +INF    ! location of knot 3(microns)
!
!
!      wire-plane 6
43   R60                F -INF   +INF    ! velocity ratio at knot 0
44   R61                F -INF   +INF    ! velocity ratio at knot 1
45   R62                F -INF   +INF    ! velocity ratio at knot 2
46   R63                F -INF   +INF    ! velocity ratio at knot 3
!
47   X61                F -INF   +INF    ! location of knot 1(microns)
48   X62                F -INF   +INF    ! location of knot 2(microns)
49   X63                F -INF   +INF    ! location of knot 3(microns)
!
!      wire-plane 7
50   R70                F -INF   +INF    ! velocity ratio at knot 0
51   R71                F -INF   +INF    ! velocity ratio at knot 1
52 R72                 F -INF   +INF    ! velocity ratio at knot 2
53   R73                F -INF   +INF    ! velocity ratio at knot 3
!
54   X71                F -INF   +INF    ! location of knot 1(microns)
55   X72                F -INF   +INF    ! location of knot 2(microns)
56   X73                F -INF   +INF    ! location of knot 3(microns)
!
!
! Errors...
!
!      wire-plane 0
!
57 E R00                F -INF   +INF    ! error on velocity ratio at knot 0
58 ER01                F -INF   +INF    ! error on velocity ratio at knot 1
59 ER02                F -INF   +INF    ! error on velocity ratio at knot 2
60 ER03               F -INF   +INF    ! error on velocity ratio at knot 3
!
61 EX01                F -INF   +INF    ! error on location of knot 1(microns)
62 EX02                F -INF   +INF    ! error on location of knot 2(microns)
63 EX03                F -INF   +INF    ! error on location of knot 3(microns)
!

!      wire-plane 1
64 ER10                F -INF   +INF    ! error on velocity ratio at knot 0
65 ER11                F -INF   +INF    ! error on velocity ratio at knot 1
66 ER12                F -INF   +INF    ! error on velocity ratio at knot 2
67 ER13                F -INF   +INF    ! error on velocity ratio at knot 3
!
68 EX11                F -INF   +INF    ! error on location of knot 1(microns)
69 EX12                F -INF   +INF    ! error on location of knot 2(microns)
70 EX13                F -INF   +INF    ! error on location of knot 3(microns)
!
!      wire-plane 2
71 ER20                F -INF   +INF    ! error on velocity ratio at knot 0
72 ER21                F -INF   +INF    ! error on velocity ratio at knot 1
73 ER22                F -INF   +INF    ! error on velocity ratio at knot 2
74 ER23                F -INF   +INF    ! error on velocity ratio at knot 3
!
75 EX21                F -INF   +INF    ! error on location of knot 1(microns)
76 EX22                F -INF   +INF    ! error on location of knot 2(microns)
77 EX23                F -INF   +INF    ! error on location of knot 3(microns)
!
!      wire-plane 3
78 ER30                F -INF   +INF    ! error on velocity ratio at knot 0
79 ER31                F -INF   +INF    ! error on velocity ratio at knot 1
80 ER32                F -INF   +INF    ! error on velocity ratio at knot 2
81 ER33                F -INF   +INF    ! error on velocity ratio at knot 3
!
82 EX31                F -INF   +INF    ! error on location of knot 1(microns)
83 EX32                F -INF   +INF    ! error on location of knot 2(microns)
84 EX33                F -INF   +INF    ! error on location of knot 3(microns)
!
!      wire-plane 4
85 ER40                F -INF   +INF    ! error on velocity ratio at knot 0
86 ER41                F -INF   +INF    ! error on velocity ratio at knot 1
87 ER42                F -INF   +INF    ! error on velocity ratio at knot 2
88 ER43                F -INF   +INF    ! error on velocity ratio at knot 3
!
89 EX41                F -INF   +INF    ! error on location of knot 1(microns)
90 EX42                F -INF   +INF    ! error on location of knot 2(microns)
91 EX43                F -INF   +INF    ! error on location of knot 3(microns)
!
!      wire-plane 5
92 ER50                F -INF   +INF    ! error on velocity ratio at knot 0
93 ER51                F -INF   +INF    ! error on velocity ratio at knot 1
94 ER52                F -INF   +INF    ! error on velocity ratio at knot 2
95 ER53                F -INF   +INF    ! error on velocity ratio at knot 3
!
96 EX51                F -INF   +INF    ! error on location of knot 1(microns)
97 EX52                F -INF   +INF    ! error on location of knot 2(microns)
98 EX53                F -INF   +INF    ! error on location of knot 3(microns)
!
!
!      wire-plane 6
99 ER60                F -INF   +INF    ! error on velocity ratio at knot 0
100 ER61                F -INF   +INF    ! error on velocity ratio at knot 1
101 ER62                F -INF   +INF    ! error on velocity ratio at knot 2
103 ER63                F -INF   +INF    ! error on velocity ratio at knot 3
!
104 EX61                F -INF   +INF    ! error on location of knot 1(microns)
105 EX62                F -INF   +INF    ! error on location of knot 2(microns)
106 EX63                F -INF   +INF    ! error on location of knot 3(microns)
!

!      wire-plane 7
107 ER70                F -INF   +INF    ! error on velocity ratio at knot 0
108 ER71                F -INF   +INF    ! error on velocity ratio at knot 1
109 ER72                F -INF   +INF    ! error on velocity ratio at knot 2
111 ER73                F -INF   +INF    ! error on velocity ratio at knot 3
!
112 EX71                F -INF   +INF    ! error on location of knot 1(microns)
113 EX72                F -INF   +INF    ! error on location of knot 2(microns)
114 EX73                F -INF   +INF    ! error on location of knot 3(microns)
!

      BANKname BANKtype     !Comments
!
TABLE FQMD                   ! Forward Planar Monitoring t0s
                                             ! wire-by-wire
!
!         S.Maxfield
!
!   ATTributes:
!   -----------
!COL ATT-name FMT Min    Max    !Comments
!
!      Delta t0's on wires 0-7 (relative to t0 in FQCT bank)
1   DTZ0                F -INF   +INF    ! Del t zero on wire-plane 0 (ns)
2   DTZ1                F -INF   +INF    ! Del t zero on wire-plane 1 (ns)
3   DTZ2                F -INF   +INF    ! Del t zero on wire-plane 2 (ns)
4   DTZ3                F -INF   +INF    ! Del t zero on wire-plane 3 (ns)
5   DTZ4                F -INF   +INF    ! Del t zero on wire-plane 4 (ns)
6   DTZ5                F -INF   +INF    ! Del t zero on wire-plane 5 (ns)
7   DTZ6                F -INF   +INF    ! Del t zero on wire-plane 6 (ns)
8   DTZ7                F -INF   +INF    ! Del t zero on wire-plane 7 (ns)

!
!      Errors on t0's for wires on wire planes 0-7
    9   EDTZ0                F -INF   +INF    ! Error on t zero on wire-plane 8 (ns)
10   EDTZ1                F -INF   +INF    ! Error on t zero on wire-plane 9 (ns)
11   EDTZ2                F -INF   +INF    ! Error on t zero on wire-plane 10 (ns)
12   EDTZ3                F -INF   +INF    ! Error on t zero on wire-plane 11 (ns)
13   EDTZ4                F -INF   +INF    ! Error on t zero on wire-plane 12 (ns)
14   EDTZ5                F -INF   +INF    ! Error on t zero on wire-plane 13 (ns)
15   EDTZ6                F -INF   +INF    ! Error on t zero on wire-plane 14 (ns)
16   EDTZ7                F -INF   +INF    ! Error on t zero on wire-plane 15 (ns)

BANKname BANKtype    !Comments
!
TABLE FPMF                ! Forward Planar montored hit-finding
! efficiencies: all and per orientation
!
! J.V.Morris
!
! ATTributes:
! -----------
!COL     ATT-name     FMT     Min     Max     !Comments
!
! Average over all P chambers
1 PF                  F         0.             1.     ! efficiency
! Orientation 0
2 PF00             F         0.             1.     ! efficiency
! Orientation 1
3 PF01             F         0.             1.     ! efficiency
! Orientation 2
4 PF02             F         0.             1.     ! efficiency
! Orientation 3
5 PF03              F         0.             1.     ! efficiency
! Orientation 4
6 PF04              F         0.             1.     ! efficiency
! Orientation 5
7 PF05             F       0.             1.     ! efficiency
! Orientation 6
8 PF06 F 0.    1. ! efficiency
! Orientation 7
9 PF07 F 0. 1. ! efficiency
! Orientation 8
10 PF08 F 0. 1. ! efficiency
! errors on estimated efficiencies
11 PE F 0. 1. ! error
12 PE00 F 0. 1. ! error
13 PE01 F 0. 1. ! error
14 PE02 F 0. 1. ! error
15 PE03 F 0. 1. ! error
16 PE04 F 0. 1. ! error
17 PE05 F 0. 1. ! error
18 PE06 F 0. 1. ! error
19 PE07 F 0. 1. ! error
20 PE08 F 0. 1. ! error
!------------------------------------------------------

BANKname BANKtype !Comments
!
TABLE FQMF ! Forward Q chamber monitored hit-finding
! efficiencies: all and per orientation
!
! J.V.Morris
!
! ATTributes:
! -----------
!COL ATT-name FMT Min Max !Comments
!
! Average over all Q chambers
1 QF F    0. 1. ! efficiency
! Orientation 0
2 QF00 F 0. 1. ! efficiency
! Orientation 1
3 QF01 F 0. 1. ! efficiency
! Orientation 2
4 QF02 F 0. 1. ! efficiency
! Orientation 3
5 QF03 F 0. 1. ! efficiency
! Orientation 4
6 QF04 F 0. 1. ! efficiency
! Orientation 5
7 QF05 F 0. 1. ! efficiency
! Orientation 6
8 QF06 F 0. 1. ! efficiency
! Orientation 7
9 QF07 F 0. 1. ! efficiency
! Orientation 8
10 QF08 F    0. 1. ! efficiency
! Orientation 9
11 QF09    F 0.    1. ! efficiency
! errors on estimated efficiencies
12 QE F 0. 1. ! error
13 QE00    F 0. 1. ! error
14 QE01    F 0.    1. ! error
15 QE02    F 0. 1. ! error
16 QE03    F 0. 1. ! error
17 QE04    F 0. 1. ! error
18 QE05    F 0. 1. ! error
19 QE06    F 0. 1. ! error
20 QE07    F 0. 1. ! error
21 QE08    F 0. 1. ! error
22 QE09    F 0. 1. ! error
!------------------------------------------------------

BANKname BANKtype !Comments
!
TABLE FTMO ! Forward Tracker MOnitoring Summary
!
! J.V.Morris
!
! ATTributes:
! -----------

!COL	ATT-name	FMT	Min	Max	!Comments
!
1	run	I	0	+INF	! run number
2	date	I	0	+INF	! date yymmdd
3	time	I	0	+INF	! time hhmmss
4	press	I	0	+INF	! atmospheric pressure mbar
5	events	I	0	+INF	! number of events
6	rtype	I	0	+INF	! run type
! P chambers

7	NFRPE	I	0	+INF	! number of FRPE banks
8	NPhits	I	0	+INF	! number of P hits
9	NPclus	I	0	+INF	! number of clean P clusters
10	PV2p	F	0	+INF	! V2p for Ps mu/nsec
11	ePV2p	F	0	+INF	! error on PV2p
12	PVdrift	F	0	+INF	! Global Vdrift for Ps mu/nsec
13	ePVdrift	F	0	+INF	! error on PVdrift
14	Pgain	F	0	+INF	! mean gain for Ps
15	ePgain	F	0	+INF	! error on Pgain
16	Pres	F	0	+INF	! P resolution mu
17	ePres	F	0	+INF	! error on Pres
18	Ptzer	F	0	+INF	! Global Tzero for Ps/td>
19	ePtzer	F	0	+INF	! error on Ptzer
20	Prelef	F	0	+INF	! outer/inner P hits per wire
21	ePrelef	F	0	+INF	! error on Prelef
22	Peff	F	0	+INF	! P efficiency
23	ePeff	F	0	+INF	! error on Peff
! Q chambers

24	NFRQE	I	0	+INF	! number of FRQE banks
25	NQhits	I	0	+INF	! number of Q hits
26	NQclus	I	0	+INF	! number of clean Q clusters
27	QV2p	F	0	+INF	! V2p for Qs mu/nsec
28	eQV2p	F	0	+INF	! error on QV2p
29	QVdrift	F	0	+INF	! Global Vdrift for Qs mu/nsec
30	eQVdrift	F	0	+INF	! error on QVdrift
31	Qgain	F	0	+INF	! mean gain for Qs
32	eQgain	F	0	+INF	! error on Qgain
33	Qres	F	0	+INF	! Q resolution mu
34	eQres	F	0	+INF	! error on Qres
35	Qtzer	F	0	+INF	! Global Tzero for Qs/td>
36	eQtzer	F	0	+INF	! error on Qtzer
37	Qrelef	F	0	+INF	! outer/inner Q hits per wire
38	eQrelef	F	0	+INF	! error on Qrelef
39	Qeff	F	0	+INF	! Q efficiency
40	eQeff	F	0	+INF	! error on Qeff

!------------------------------------------------------

BANKname BANKtype !Comments
!
TABLE FPMO ! Forward Planar MOnitoring
!
! G.D.Patel/S.J.Maxfield
!
! ATTributes:
! -----------

!COL ATT-name FMT Min Max !Comments

!

! FPMT

1 TZERO F -INF +INF ! Global T0 (ns)

2 DTZER F -INF +INF ! Error on Global To (ns)

! FPMV

3 VAV F -INF +INF ! Global mean v (microns/ns)

4 DVAV F -INF +INF ! Error on Gloabal mean v

! FPMK

5 R0 F -INF +INF ! velocity ratio at knot 0

6 R1 F -INF +INF ! velocity ratio at knot 1

7 R2 F -INF +INF ! velocity ratio at knot 2

8 R3 F -INF +INF ! velocity ratio at knot 3

9 X1 F -INF +INF ! location of knot 1 (microns)

10 X2 F -INF +INF ! location of knot 2 (microns)

11 X3 F -INF +INF ! location of knot 3 (microns)

! Errors

12 ER0 F -INF +INF ! error on velocity ratio at knot 0

13 ER1 F -INF +INF ! error on velocity ratio at knot 1

14 ER2 F -INF +INF ! error on velocity ratio at knot 2

15 ER3 F -INF +INF ! error on velocity ratio at knot 3

16 EX1 F -INF +INF ! error on location of knot 1 (microns)

17 EX2 F -INF +INF ! error on location of knot 2 (microns)

18 EX3 F -INF +INF ! error on location of knot 3 (microns)

! FPMF

19 PF F 0. 1. ! efficiency all

20 PF00 F 0. 1. ! efficiency Ori0

21 PF01 F 0. 1. ! efficiency Ori1

22 PF02 F 0. 1. ! efficiency Ori2

23 PF03 F 0. 1. ! efficiency Ori3

24 PF04 F 0. 1. ! efficiency Ori4

25 PF05 F 0. 1. ! efficiency Ori5

26 PF06 F 0. 1. ! efficiency Ori6

27 PF07 F 0. 1. ! efficiency Ori7

28 PF08 F 0. 1. ! efficiency Ori8

! errors on estimated efficiencies

29 PE F 0. 1. ! error on efficiency all

30 PE00 F 0. 1. ! error on efficiency Ori0

31 PE01 F 0. 1. ! error on efficiency Ori1

32 PE02 F 0. 1. ! error on efficiency Ori2

33 PE03 F 0. 1. ! error on efficiency Ori3

34 PE04 F 0. 1. ! error on efficiency Ori4

35 PE05 F 0. 1. ! error on efficiency Ori5

36 PE06 F 0. 1. ! error on efficiency Ori6

37 PE07 F 0. 1. ! error on efficiency Ori7

38 PE08 F 0. 1. ! error on efficiency Ori8

! FPMR

! wire plane 0

39 R00 F -INF +INF ! velocity ratio at knot 0

40 R01 F -INF +INF ! velocity ratio at knot 1

41 R02 F -INF +INF ! velocity ratio at knot 2

42 R03 F -INF +INF ! velocity ratio at knot 3

!

43 X01 F -INF +INF ! location of knot 1 (microns)

44 X02 F -INF +INF ! location of knot 2 (microns)

45 X03 F -INF +INF ! location of knot 3 (microns)

! wire plane 1

46 R10 F -INF +INF ! velocity ratio at knot 0

47 R11 F -INF +INF ! velocity ratio at knot 1

48 R12 F -INF +INF ! velocity ratio at knot 2

49 R13 F -INF +INF ! velocity ratio at knot 3

!

50 X11 F -INF +INF ! location of knot 1 (microns)

51 X12 F -INF +INF ! location of knot 2 (microns)

52 X13 F -INF +INF ! location of knot 3 (microns)

! wire plane 2

53 R20 F -INF +INF ! velocity ratio at knot 0

54 R21 F -INF +INF ! velocity ratio at knot 1

55 R22 F -INF +INF ! velocity ratio at knot 2

56 R23 F -INF +INF ! velocity ratio at knot 3

!

57 X21 F -INF +INF ! location of knot 1 (microns)

58 X22 F -INF +INF ! location of knot 2 (microns)

59 X23 F -INF +INF ! location of knot 3 (microns)

! wire plane 3

60 R30 F -INF +INF ! velocity ratio at knot 0

61 R31 F -INF +INF ! velocity ratio at knot 1

62 R32 F -INF +INF ! velocity ratio at knot 2

63 R33 F -INF +INF ! velocity ratio at knot 3

!

64 X31 F -INF +INF ! location of knot 1 (microns)

65 X32 F -INF +INF ! location of knot 2 (microns)

66 X33 F -INF +INF ! location of knot 3 (microns)

! Errors

! wire plane 0

67 ER00 F -INF +INF ! velocity ratio at knot 0

68 ER01 F -INF +INF ! velocity ratio at knot 1

69 ER02 F -INF +INF ! velocity ratio at knot 2

70 ER03 F -INF +INF ! velocity ratio at knot 3

!

71 EX01 F -INF +INF ! location of knot 1 (microns)

72 EX02 F -INF +INF ! location of knot 2 (microns)

73 EX03 F -INF +INF ! location of knot 3 (microns)

! wire plane 1

74 ER10 F -INF +INF ! velocity ratio at knot 0

75 ER11 F -INF +INF ! velocity ratio at knot 1

76 ER12 F -INF +INF ! velocity ratio at knot 2

77 ER13 F -INF +INF ! velocity ratio at knot 3

!

78 EX11 F -INF +INF ! location of knot 1 (microns)

79 EX12 F -INF +INF ! location of knot 2 (microns)

80 EX13 F -INF +INF ! location of knot 3 (microns)

! wire plane 2

81 ER20 F -INF +INF ! velocity ratio at knot 0

82 ER21 F -INF +INF ! velocity ratio at knot 1

83 ER22 F -INF +INF ! velocity ratio at knot 2

84 ER23 F -INF +INF ! velocity ratio at knot 3

!

85 EX21 F -INF +INF ! location of knot 1 (microns)

86 EX22 F -INF +INF ! location of knot 2 (microns)

87 EX23 F -INF +INF ! location of knot 3 (microns)

! wire plane 3

88 ER30 F -INF +INF ! velocity ratio at knot 0

89 ER31 F -INF +INF ! velocity ratio at knot 1

90 ER32 F -INF +INF ! velocity ratio at knot 2

91 ER33 F -INF +INF ! velocity ratio at knot 3

!

92 EX31 F -INF +INF ! location of knot 1 (microns)

93 EX32 F -INF +INF ! location of knot 2 (microns)

94 EX33 F -INF +INF ! location of knot 3 (microns)

! FPMD

! Delta-t0's on wires 0-3
(relative to global t0 in FPCT bank)

95 DTZ0 F -INF +INF ! delta t zero on wire-plane 0 (ns)

96 DTZ1 F -INF +INF ! delta t zero on wire-plane 1 (ns)

97 DTZ2 F -INF +INF ! delta t zero on wire-plane 2 (ns)

98 DTZ3 F -INF +INF ! delta t zero on wire-plane 3 (ns)

! Errors

99 EDTZ0 F -INF +INF ! error on delta t zero on wire-plane 0 (ns)

100 EDTZ1 F -INF +INF ! error on delta t zero on wire-plane 1 (ns)

101 EDTZ2 F -INF +INF ! error on delta t zero on wire-plane 2 (ns)

102 EDTZ3 F -INF +INF ! error on delta t zero on wire-plane 3 (ns)

BANKname BANKtype !Comments
!
TABLE FQMO ! Forward Planar MOnitoring
!
! G.D.Patel/S.J.Maxfield
!
! ATTributes:
! -----------

!COL ATT-name FMT Min Max !Comments

!

! FQMT

1 TZERO F -INF +INF ! Global T0 (ns)

2 DTZER F -INF +INF ! Error on Global To (ns)

! FQMV

3 VAV F -INF +INF ! Global mean v (microns/ns)

4 DVAV F -INF +INF ! Error on Gloabal mean v

! FQMK

5 R0 F -INF +INF ! velocity ratio at knot 0

6 R1 F -INF +INF ! velocity ratio at knot 1

7 R2 F -INF +INF ! velocity ratio at knot 2

8 R3 F -INF +INF ! velocity ratio at knot 3

9 X1 F -INF +INF ! location of knot 1 (microns)

10 X2 F -INF +INF ! location of knot 2 (microns)

11 X3 F -INF +INF ! location of knot 3 (microns)

! Errors

12 ER0 F -INF +INF ! error on velocity ratio at knot 0

13 ER1 F -INF +INF ! error on velocity ratio at knot 1

14 ER2 F -INF +INF ! error on velocity ratio at knot 2

15 ER3 F -INF +INF ! error on velocity ratio at knot 3

16 EX1 F -INF +INF ! error on location of knot 1 (microns)

17 EX2 F -INF +INF ! error on location of knot 2 (microns)

18 EX3 F -INF +INF ! error on location of knot 3 (microns)

! FQMF

19 QF F 0. 1. ! efficiency all

20 QF00 F 0. 1. ! efficiency Ori0

21 QF01 F 0. 1. ! efficiency Ori1

22 QF02 F 0. 1. ! efficiency Ori2

23 QF03 F 0. 1. ! efficiency Ori3

24 QF04 F 0. 1. ! efficiency Ori4

25 QF05 F 0. 1. ! efficiency Ori5

26 QF06 F 0. 1. ! efficiency Ori6

27 QF07 F 0. 1. ! efficiency Ori7

28 PF08 F 0. 1. ! efficiency Ori8

29 PF08 F 0. 1. ! efficiency Ori9

! errors on estimated efficiencies

30 QE F 0. 1. ! error on efficiency all

31 QE00 F 0. 1. ! error on efficiency Ori0

32 QE01 F 0. 1. ! error on efficiency Ori1

33 QE02 F 0. 1. ! error on efficiency Ori2

34 QE03 F 0. 1. ! error on efficiency Ori3

35 QE04 F 0. 1. ! error on efficiency Ori4

36 QE05 F 0. 1. ! error on efficiency Ori5

37 QE06 F 0. 1. ! error on efficiency Ori6

38 QE07 F 0. 1. ! error on efficiency Ori7

39 QE08 F 0. 1. ! error on efficiency Ori8

40 QE09 F 0. 1. ! error on efficiency Ori9

! FQMR

! wire plane 0

41 R00 F -INF +INF ! velocity ratio at knot 0

42 R01 F -INF +INF ! velocity ratio at knot 1

43 R02 F -INF +INF ! velocity ratio at knot 2

44 R03 F -INF +INF ! velocity ratio at knot 3

!

45 X01 F -INF +INF ! location of knot 1 (microns)

46 X02 F -INF +INF ! location of knot 2 (microns)

47 X03 F -INF +INF ! location of knot 3 (microns)

! wire plane 1

48 R10 F -INF +INF ! velocity ratio at knot 0

49 R11 F -INF +INF ! velocity ratio at knot 1

50 R12 F -INF +INF ! velocity ratio at knot 2

51 R13 F -INF +INF ! velocity ratio at knot 3

!

52 X11 F -INF +INF ! location of knot 1 (microns)

53 X12 F -INF +INF ! location of knot 2 (microns)

54 X13 F -INF +INF ! location of knot 3 (microns)

! wire plane 2

55 R20 F -INF +INF ! velocity ratio at knot 0

56 R21 F -INF +INF ! velocity ratio at knot 1

57 R22 F -INF +INF ! velocity ratio at knot 2

58 R23 F -INF +INF ! velocity ratio at knot 3

!

59 X21 F -INF +INF ! location of knot 1 (microns)

60 X22 F -INF +INF ! location of knot 2 (microns)

61 X23 F -INF +INF ! location of knot 3 (microns)

! wire plane 3

62 R30 F -INF +INF ! velocity ratio at knot 0

63 R31 F -INF +INF ! velocity ratio at knot 1

64 R32 F -INF +INF ! velocity ratio at knot 2

65 R33 F -INF +INF ! velocity ratio at knot 3

!

66 X31 F -INF +INF ! location of knot 1 (microns)

67 X32 F -INF +INF ! location of knot 2 (microns)

68 X33 F -INF +INF ! location of knot 3 (microns)

! wire plane 4

69 R40 F -INF +INF ! velocity ratio at knot 0

70 R41 F -INF +INF ! velocity ratio at knot 1

71 R42 F -INF +INF ! velocity ratio at knot 2

72 R43 F -INF +INF ! velocity ratio at knot 3

!

73 X41 F -INF +INF ! location of knot 1 (microns)

74 X42 F -INF +INF ! location of knot 2 (microns)

75 X43 F -INF +INF ! location of knot 3 (microns)

! wire plane 5

76 R50 F -INF +INF ! velocity ratio at knot 0

77 R51 F -INF +INF ! velocity ratio at knot 1

78 R52 F -INF +INF ! velocity ratio at knot 2

79 R53 F -INF +INF ! velocity ratio at knot 3

!

80 X51 F -INF +INF ! location of knot 1 (microns)

81 X52 F -INF +INF ! location of knot 2 (microns)

82 X53 F -INF +INF ! location of knot 3 (microns)

! wire plane 6

83 R60 F -INF +INF ! velocity ratio at knot 0

84 R61 F -INF +INF ! velocity ratio at knot 1

85 R62 F -INF +INF ! velocity ratio at knot 2

86 R63 F -INF +INF ! velocity ratio at knot 3

!

87 X61 F -INF +INF ! location of knot 1 (microns)

88 X62 F -INF +INF ! location of knot 2 (microns)

89 X63 F -INF +INF ! location of knot 3 (microns)

! wire plane 7

90 R70 F -INF +INF ! velocity ratio at knot 0

91 R71 F -INF +INF ! velocity ratio at knot 1

92 R72 F -INF +INF ! velocity ratio at knot 2

93 R73 F -INF +INF ! velocity ratio at knot 3

!

94 X71 F -INF +INF ! location of knot 1 (microns)

95 X72 F -INF +INF ! location of knot 2 (microns)

96 X73 F -INF +INF ! location of knot 3 (microns)

! Errors

! wire plane 0

97 ER00 F -INF +INF ! velocity ratio at knot 0

98 ER01 F -INF +INF ! velocity ratio at knot 1

99 ER02 F -INF +INF ! velocity ratio at knot 2

100 ER03 F -INF +INF ! velocity ratio at knot 3

!

101 EX01 F -INF +INF ! location of knot 1 (microns)

102 EX02 F -INF +INF ! location of knot 2 (microns)

103 EX03 F -INF +INF ! location of knot 3 (microns)

! wire plane 1

104 ER10 F -INF +INF ! velocity ratio at knot 0

105 ER11 F -INF +INF ! velocity ratio at knot 1

106 ER12 F -INF +INF ! velocity ratio at knot 2

107 ER13 F -INF +INF ! velocity ratio at knot 3

!

108 EX11 F -INF +INF ! location of knot 1 (microns)

109 EX12 F -INF +INF ! location of knot 2 (microns)

110 EX13 F -INF +INF ! location of knot 3 (microns)

! wire plane 2

111 ER20 F -INF +INF ! velocity ratio at knot 0

112 ER21 F -INF +INF ! velocity ratio at knot 1

113 ER22 F -INF +INF ! velocity ratio at knot 2

114 ER23 F -INF +INF ! velocity ratio at knot 3

!

115 EX21 F -INF +INF ! location of knot 1 (microns)

116 EX22 F -INF +INF ! location of knot 2 (microns)

117 EX23 F -INF +INF ! location of knot 3 (microns)

! wire plane 3

118 ER30 F -INF +INF ! velocity ratio at knot 0

119 ER31 F -INF +INF ! velocity ratio at knot 1

120 ER32 F -INF +INF ! velocity ratio at knot 2

121 ER33 F -INF +INF ! velocity ratio at knot 3

!

122 EX31 F -INF +INF ! location of knot 1 (microns)

123 EX32 F -INF +INF ! location of knot 2 (microns)

124 EX33 F -INF +INF ! location of knot 3 (microns)

! wire plane 4

125 ER40 F -INF +INF ! velocity ratio at knot 0

126 ER41 F -INF +INF ! velocity ratio at knot 1

127 ER42 F -INF +INF ! velocity ratio at knot 2

128 ER43 F -INF +INF ! velocity ratio at knot 3

!

129 EX41 F -INF +INF ! location of knot 1 (microns)

130 EX42 F -INF +INF ! location of knot 2 (microns)

131 EX43 F -INF +INF ! location of knot 3 (microns)

! wire plane 5

132 ER50 F -INF +INF ! velocity ratio at knot 0

133 ER51 F -INF +INF ! velocity ratio at knot 1

134 ER52 F -INF +INF ! velocity ratio at knot 2

135 ER53 F -INF +INF ! velocity ratio at knot 3

!

136 EX51 F -INF +INF ! location of knot 1 (microns)

137 EX52 F -INF +INF ! location of knot 2 (microns)

138 EX53 F -INF +INF ! location of knot 3 (microns)

! wire plane 6

139 ER60 F -INF +INF ! velocity ratio at knot 0

140 ER61 F -INF +INF ! velocity ratio at knot 1

141 ER62 F -INF +INF ! velocity ratio at knot 2

142 ER63 F -INF +INF ! velocity ratio at knot 3

!

143 EX61 F -INF +INF ! location of knot 1 (microns)

144 EX62 F -INF +INF ! location of knot 2 (microns)

145 EX63 F -INF +INF ! location of knot 3 (microns)

! wire plane 7

146 ER70 F -INF +INF ! velocity ratio at knot 0

147 ER71 F -INF +INF ! velocity ratio at knot 1

148 ER72 F -INF +INF ! velocity ratio at knot 2

149 ER73 F -INF +INF ! velocity ratio at knot 3

!

150 EX71 F -INF +INF ! location of knot 1 (microns)

151 EX72 F -INF +INF ! location of knot 2 (microns)

152 EX73 F -INF +INF ! location of knot 3 (microns)

! FQMD

! Delta-t0's on wires 0-3
ative to global t0 in FPCT bank)

153 DTZ0 F -INF +INF ! delta t zero on wire-plane 0 (ns)

154 DTZ1 F -INF +INF ! delta t zero on wire-plane 1 (ns)

155 DTZ2 F -INF +INF ! delta t zero on wire-plane 2 (ns)

156 DTZ3 F -INF +INF ! delta t zero on wire-plane 3 (ns)

157 DTZ4 F -INF +INF ! delta t zero on wire-plane 3 (ns)

158 DTZ5 F -INF +INF ! delta t zero on wire-plane 3 (ns)

159 DTZ6 F -INF +INF ! delta t zero on wire-plane 3 (ns)

160 DTZ7 F -INF +INF ! delta t zero on wire-plane 3 (ns)

! Errors

161 EDTZ0 F -INF +INF ! error on delta t zero on wire-plane 0 (ns)

162 EDTZ1 F -INF +INF ! error on delta t zero on wire-plane 1 (ns)

163 EDTZ2 F -INF +INF ! error on delta t zero on wire-plane 2 (ns)

164 EDTZ3 F -INF +INF ! error on delta t zero on wire-plane 3 (ns)

165 EDTZ4 F -INF +INF ! error on delta t zero on wire-plane 3 (ns)

166 EDTZ5 F -INF +INF ! error on delta t zero on wire-plane 3 (ns)

167 EDTZ6 F -INF +INF ! error on delta t zero on wire-plane 3 (ns)

168 EDTZ7 F -INF +INF ! error on delta t zero on wire-plane 3 (ns)