+PATCH,DDL_FORW,IF=DDL. +DECK,FPCT. *-- Author : S.Maxfield ! ! BANKname BANKtype !Comments ! TABLE FPCT ! Forward Planar Calibration t0 ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! 1 TZERO F -INF +INF ! Global t0 (ns) ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCV. *-- Author : S.Maxfield ! ! BANKname BANKtype !Comments ! TABLE FPCV ! Forward Planar Calibration velocity ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! 1 VAV F -INF +INF ! Global (microns/ns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCB. *-- Author : S.Maxfield ! BANKname BANKtype !Comments ! TABLE FPCB ! Forward Planar Calibration Beta parameters ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! beta asymmetrys at the wire and 3 knot points 1 BETA0 F -INF +INF ! Beta asymmetry at wire 2 BETA 1 F -INF +INF ! Beta asymmetry at 1st knot point 3 BETA 2 F -INF +INF ! Beta asymmetry at 2nd knot point 4 BETA 3 F -INF +INF ! Beta asymmetry at 3rd knot point 5 STAGGE F -INF +INF ! effective stagger (microns) ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCK. *-- Author : S.Maxfield ! ! BANKname BANKtype !Comments ! TABLE FPCK ! Forward Planar Calibration t-to-d ! Global time to distance parameters ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! 1 R0 F -INF +INF ! velocity ratio at knot 0 2 R1 F -INF +INF ! velocity ratio at knot 1 3 R2 F -INF +INF ! velocity ratio at knot 2 4 R3 F -INF +INF ! velocity ratio at knot 3 ! 5 X1 F -INF +INF ! location of knot 1 (microns) 6 X2 F -INF +INF ! location of knot 2 (microns) 7 X3 F -INF +INF ! location of knot 3 (microns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCR. *-- Author : S.Maxfield ! ! BANKname BANKtype !Comments ! TABLE FPCR ! Forward Planar Calibration t-to-d ! wire-plane-by-wire-plane ! time to distance parameters ! Velocity ratio wrt from FPCV bank ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! wire-plane 0 1 R00 F -INF +INF ! velocity ratio at knot 0 2 R01 F -INF +INF ! velocity ratio at knot 1 3 R02 F -INF +INF ! velocity ratio at knot 2 4 R03 F -INF +INF ! velocity ratio at knot 3 ! 5 X01 F -INF +INF ! location of knot 1 (microns) 6 X02 F -INF +INF ! location of knot 2 (microns) 7 X03 F -INF +INF ! location of knot 3 (microns) ! ! wire-plane 1 8 R10 F -INF +INF ! velocity ratio at knot 0 9 R11 F -INF +INF ! velocity ratio at knot 1 10 R12 F -INF +INF ! velocity ratio at knot 2 11 R13 F -INF +INF ! velocity ratio at knot 3 ! 12 X11 F -INF +INF ! location of knot 1 (microns) 13 X12 F -INF +INF ! location of knot 2 (microns) 14 X13 F -INF +INF ! location of knot 3 (microns) ! ! wire-plane 2 15 R20 F -INF +INF ! velocity ratio at knot 0 16 R21 F -INF +INF ! velocity ratio at knot 1 17 R22 F -INF +INF ! velocity ratio at knot 2 18 R23 F -INF +INF ! velocity ratio at knot 3 ! 19 X21 F -INF +INF ! location of knot 1 (microns) 20 X22 F -INF +INF ! location of knot 2 (microns) 21 X23 F -INF +INF ! location of knot 3 (microns) ! ! wire-plane 3 22 R30 F -INF +INF ! velocity ratio at knot 0 23 R31 F -INF +INF ! velocity ratio at knot 1 24 R32 F -INF +INF ! velocity ratio at knot 2 25 R33 F -INF +INF ! velocity ratio at knot 3 ! 26 X31 F -INF +INF ! location of knot 1 (microns) 27 X32 F -INF +INF ! location of knot 2 (microns) 28 X33 F -INF +INF ! location of knot 3 (microns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCD. *-- Author : S.Maxfield ! BANKname BANKtype !Comments ! TABLE FPCD ! Forward Planar Calibration t0s ! wire-by-wire ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! Delta-t0's on wires 0-3 (relative to global t0 in FPCT bank) 1 DTZ0 F -INF +INF ! t zero on wire-plane 0 (ns) 2 DTZ1 F -INF +INF ! t zero on wire-plane 1 (ns) 3 DTZ2 F -INF +INF ! t zero on wire-plane 2 (ns) 4 DTZ3 F -INF +INF ! t zero on wire-plane 3 (ns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCE. *-- Author : S.Maxfield ! BANKname BANKtype !Comments ! TABLE FPCE ! Forward Planar Calibration resolution !parameters ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! err = sqrt(e0**2 + d*e1**2 + e2**2 * exp(-e3*d) ) ! N.B. gives error in microns when d is drift in cms! ! 1 ERRD00 F -INF +INF ! microns 2 ERRD01 F -INF +INF ! microns/sqrt(cms) 3 ERRD02 F -INF +INF ! microns 4 ERRD03 F -INF +INF ! cm**-1 ! 5 ERRD10 F -INF +INF ! 6 ERRD11 F -INF +INF ! 7 ERRD12 F -INF +INF ! wire-plane 1 8 ERRD13 F -INF +INF ! ! 9 ERRD20 F -INF +INF ! 10 ERRD21 F -INF +INF ! 11 ERRD22 F -INF +INF ! wire-plane 2 12 ERRD23 F -INF +INF ! ! 13 ERRD30 F -INF +INF ! 14 ERRD31 F -INF +INF ! 15 ERRD32 F -INF +INF ! wire-plane 3 16 ERRD33 F -INF +INF ! ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCA. *-- Author : S.Maxfield ! BANKname BANKtype !Comments ! TABLE FPCA ! Forward Planar Calibration steering ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! 1 DRMAX F -INF +INF ! maximum alowed drift (cms) 2 TBMIN F -INF +INF ! minimum allowed drift time(ns) 3 DTANGP F -INF +INF ! isochrone radius for track angle ! ! correction (cms) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FPCW. ! BANKname BANKtype !Comments ! TABLE FPCW ! Forward P chamber channel re-mapping bank. ! ! FTREC version. ! ! S, J, Maxfield ! ! ATTributes: ! ----------- ! COL ATT-name FMT Min Max !Comments ! ! Average over all Q chambers 1 ISWP I 0 1151 ! swap channel +PATCH,DDL_FORW,IF=DDL. +DECK,FQCT. *-- Author : S.Maxfield ! BANKname BANKtype !Comments ! TABLE FQCT ! Forward Planar Calibration t0 ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! 1 Tzero F -INF +INF ! Global t0 (ns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCV. ! BANKname BANKtype !Comments ! TABLE FQCV ! Forward Planar Calibration velocity ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! 1 Vav F -INF +INF ! Global (microns/ns) ! ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCK. ! BANKname BANKtype !Comments ! TABLE FQCK ! Forward Planar Calibration t-to-d ! Global time to distance parameters ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! 1 R0 F -INF +INF ! velocity ratio at knot 0 2 R1 F -INF +INF ! velocity ratio at knot 1 3 R2 F -INF +INF ! velocity ratio at knot 2 4 R3 F -INF +INF ! velocity ratio at knot 3 ! 5 X1 F -INF +INF ! location of knot 1 (microns) 6 X2 F -INF +INF ! location of knot 2 (microns) 7 X3 F -INF +INF ! location of knot 3 (microns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCR. ! BANKname BANKtype !Comments ! TABLE FQCR ! Forward Planar Calibration t-to-d ! wire-by-wire time to distance parameters ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! wire-plane 0 1 R00 F -INF +INF ! velocity ratio at knot 0 2 R01 F -INF +INF ! velocity ratio at knot 1 3 R02 F -INF +INF ! velocity ratio at knot 2 4 R03 F -INF +INF ! velocity ratio at knot 3 ! 5 X01 F -INF +INF ! location of knot 1(microns) 6 X02 F -INF +INF ! location of knot 2(microns) 7 X03 F -INF +INF ! location of knot 3(microns) ! ! wire-plane 1 8 R10 F -INF +INF ! velocity ratio at knot 0 9 R11 F -INF +INF ! velocity ratio at knot 1 10 R12 F -INF +INF ! velocity ratio at knot 2 11 R13 F -INF +INF ! velocity ratio at knot 3 ! 12 X11 F -INF +INF ! location of knot 1(microns) 13 X12 F -INF +INF ! location of knot 2(microns) 14 X13 F -INF +INF ! location of knot 3(microns) ! ! wire-plane 2 15 R20 F -INF +INF ! velocity ratio at knot 0 16 R21 F -INF +INF ! velocity ratio at knot 1 17 R22 F -INF +INF ! velocity ratio at knot 2 18 R23 F -INF +INF ! velocity ratio at knot 3 ! 19 X21 F -INF +INF ! location of knot 1(microns) 20 X22 F -INF +INF ! location of knot 2(microns) 21 X23 F -INF +INF ! location of knot 3(microns) ! ! wire-plane 3 22 R30 F -INF +INF ! velocity ratio at knot 0 23 R31 F -INF +INF ! velocity ratio at knot 1 24 R32 F -INF +INF ! velocity ratio at knot 2 25 R33 F -INF +INF ! velocity ratio at knot 3 ! 26 X31 F -INF +INF ! location of knot 1(microns) 27 X32 F -INF +INF ! location of knot 2(microns) 28 X33 F -INF +INF ! location of knot 3(microns) ! ! wire-plane 4 29 R40 F -INF +INF ! velocity ratio at knot 0 30 R41 F -INF +INF ! velocity ratio at knot 1 31 R42 F -INF +INF ! velocity ratio at knot 2 32 R43 F -INF +INF ! velocity ratio at knot 3 ! 33 X41 F -INF +INF ! location of knot 1(microns) 34 X42 F -INF +INF ! location of knot 2(microns) 35 X43 F -INF +INF ! location of knot 3(microns) ! ! wire-plane 5 36 R50 F -INF +INF ! velocity ratio at knot 0 37 R51 F -INF +INF ! velocity ratio at knot 1 38 R52 F -INF +INF ! velocity ratio at knot 2 39 R53 F -INF +INF ! velocity ratio at knot 3 ! 40 X51 F -INF +INF ! location of knot 1(microns) 41 X52 F -INF +INF ! location of knot 2(microns) 42 X53 F -INF +INF ! location of knot 3(microns) ! ! ! wire-plane 6 43 R60 F -INF +INF ! velocity ratio at knot 0 44 R61 F -INF +INF ! velocity ratio at knot 1 45 R62 F -INF +INF ! velocity ratio at knot 2 46 R63 F -INF +INF ! velocity ratio at knot 3 ! 47 X61 F -INF +INF ! location of knot 1(microns) 48 X62 F -INF +INF ! location of knot 2(microns) 49 X63 F -INF +INF ! location of knot 3(microns) ! ! wire-plane 7 50 R70 F -INF +INF ! velocity ratio at knot 0 51 R71 F -INF +INF ! velocity ratio at knot 1 52 R72 F -INF +INF ! velocity ratio at knot 2 53 R73 F -INF +INF ! velocity ratio at knot 3 ! 54 X71 F -INF +INF ! location of knot 1(microns) 55 X72 F -INF +INF ! location of knot 2(microns) 56 X73 F -INF +INF ! location of knot 3(microns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCD. ! BANKname BANKtype !Comments ! TABLE FQCD ! Forward Planar Calibration t0s ! wire-by-wire ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! Delta t0's on wires 0-7 (relative to t0 in FQCT bank) 1 DTZ0 F -INF +INF ! t zero on wire-plane 0 (ns) 2 DTZ1 F -INF +INF ! t zero on wire-plane 1 (ns) 3 DTZ2 F -INF +INF ! t zero on wire-plane 2 (ns) 4 DTZ3 F -INF +INF ! t zero on wire-plane 3 (ns) 5 DTZ4 F -INF +INF ! t zero on wire-plane 4 (ns) 6 DTZ5 F -INF +INF ! t zero on wire-plane 5 (ns) 7 DTZ6 F -INF +INF ! t zero on wire-plane 6 (ns) 8 DTZ7 F -INF +INF ! t zero on wire-plane 7 (ns) ! ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCB. ! BANKname BANKtype !Comments ! TABLE FQCB ! Forward Planar Calibration Beta parameters ! ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! beta asymmetrys at the wire and 3 knot points 1 BETA0 F -INF +INF ! Beta asymmetry at wire 2 BETA 1 F -INF +INF ! Beta asymmetry at 1st knot point 3 BETA 2 F -INF +INF ! Beta asymmetry at 2nd knot point 4 BETA 3 F -INF +INF ! Beta asymmetry at 3rd knot point 5 STAGGE F -INF +INF ! effective stagger (microns) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCE. ! BANKname BANKtype !Comments ! TABLE FQCE ! Forward Planar Calibration resolution !parameters ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! err = sqrt(e0**2 + d*e1**2 + e2**2 * exp(-e3*d) ) ! N.B. gives error in microns when d is drift in cms! ! 1 ERRD00 F -INF +INF ! microns 2 ERRD01 F -INF +INF ! mcrons / sqrt(cm) 3 ERRD02 F -INF +INF ! micrond 4 ERRD03 F -INF +INF ! cm**-1 ! 5 ERRD10 F -INF +INF ! 6 ERRD11 F -INF +INF ! as above 7 ERRD12 F -INF +INF ! wire-plane 1 8 ERRD13 F -INF +INF ! ! 9 ERRD20 F -INF +INF ! 10 ERRD21 F -INF +INF ! 11 ERRD22 F -INF +INF ! wire-plane 2 12 ERRD23 F -INF +INF ! ! 13 ERRD30 F -INF +INF ! 14 ERRD31 F -INF +INF ! 15 ERRD32 F -INF +INF ! wire-plane 3 16 ERRD33 F -INF +INF ! ! 17 ERRD40 F -INF +INF ! 18 ERRD41 F -INF +INF ! 19 ERRD42 F -INF +INF ! wire-plane 4 20 ERRD43 F -INF +INF ! ! 21 ERRD50 F -INF +INF ! 22 ERRD51 F -INF +INF ! 23 ERRD52 F -INF +INF ! wire-plane 5 24 ERRD53 F -INF +INF ! ! 25 ERRD60 F -INF +INF ! 26 ERRD61 F -INF +INF ! 27 ERRD62 F -INF +INF ! wire-plane 6 28 ERRD63 F -INF +INF ! ! 29 ERRD70 F -INF +INF ! 30 ERRD71 F -INF +INF ! 31 ERRD72 F -INF +INF ! wire-plane 7 32 ERRD73 F -INF +INF ! ! ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCA. ! BANKname BANKtype !Comments ! TABLE FQCA ! Forward Planar Calibration steering ! ! S.Maxfield ! ! ATTributes: ! ----------- !COL ATT-name FMT Min Max !Comments ! ! 1 DRMAX F -INF +INF ! maximum alowed drift (cms) 2 TBMIN F -INF +INF ! minimum allowed drift time (ns) 3 DTANGP F -INF +INF ! parameter for track angle correction !isochrone radius (cms) ! ! END TABLE +PATCH,DDL_FORW,IF=DDL. +DECK,FQCW. ! BANKname BANKtype !Comments ! TABLE FQCW ! Forward Q chamber channel re-mapping bank. ! ! One row per channel FTREC version. ! ! S, J, Maxfield ! ! ATTributes: ! ----------- ! COL ATT-name FMT Min Max !Comments ! ! Average over all Q chambers 1 ISWP I 0 1119 ! swap channel