Pin    Description
------  -------------------
In1    - input 1 for the strip detector
...
In128  - input 128 for the strip detector

Vana   - analog supply current (150...200)uA, analog Nwell
Vdig   - digital supply voltage 2.5 V max, digital Nwell
LE     - common enable for the readout (together with Rphi2)
Reset  - switch to initialize the preamplifiers
IS     - switch to (dis)connect detectors
IS2    - switch to (dis)connect the pipeline
SR     - switch for a self-read function
RG     - bias for the optional feedback transistor (over-writeable)
R12    - switch for the optional feedback transistor
CS     - switch for the optional feedback capacitor (320 fF)
Vthres - threshold voltage for digital inputs (over-writeable)
RBIB   - RBI complementary signal
RBI    - input of the readout shift register
RPhi1  - clock 1 for the readout shift register
RPhi2  - clock 2 for the readout shift register
RBO    - output of the readout shift register
Aref   - pedestal voltage for the analog outputs (over-writeable)
Adum   - output of the dummy channel (for the noise subtraction)
Aout   - main analog output
Cal    - calibration pulse
SEB    - enable sampling shift register (inverted)
SBIB   - SBI complementary signal
SBI    - input of the sampling shift register
SPhi1B - SPhi1 complementary signal
SPhi1  - clock 1 for the sampling shift register
SPhi2B - SPhi2 complementary signal
SPhi2  - clock 2 for the sampling shift register
NULL   - analog quasi-ground (preamp`s shifting)
GND    - common ground (analog and digital) and substrate