[BUTTON] Tank scaffold placeholder design

[jgboissevain at comcast.net]

Caution: This email originated from outside of the University. Do not click links or open attachments unless you recognise the source of this email and know the content is safe. Check sender address, hover over URLs and don't open suspicious email attachments.

Hi Paul

I think the next step is to identify a local scaffold vendor and work with
them to advance the design.  I wanted to show something so we could have a
discussion but it is just a placeholder.  

Jan

 

From: Paul Scovell - STFC UKRI <paul.scovell at stfc.ac.uk> 
Sent: Tuesday, July 9, 2024 3:55 AM
To: j.coleman at liverpool.ac.uk; jgboissevain at comcast.net;
button at hep.ph.liv.ac.uk
Subject: Re: [BUTTON] Tank scaffold placeholder design

 

Hi All,

 

It looks good. I have a couple of questions.

 

1.	Maybe I'm zooming in to the wrong place but would you envisage steps
going up to this? If so, where would they be and if not, how would you get
someone up to the platform
2.	Will the fencing around the platform be removable? This might be
useful for craning items in in case you have anything that only just fits
under the crane hook (the fencing looks a bit higher than the tank).
3.	Is there a benefit to being dodecagonal or would a square platform
be preferable? It might give a little extra space to get around the tank if
you need an a-frame for a rescue hoist for example

 

Best,

 

Paul Scovell | Senior Scientist

UK Research and Innovation (STFC) | Boulby Underground Laboratory 

Boulby Mine, North Yorkshire, TS13 4UZ

Tel:   <tel:+441287646304> +44 (0)1287 646304

Mob:  <tel:+447517829776> +44 7517 829776

 <https://www.boulby.stfc.ac.uk/> https://www.boulby.stfc.ac.uk

 

From: button <button-bounces at hep.ph.liv.ac.uk
<mailto:button-bounces at hep.ph.liv.ac.uk> > on behalf of Coleman, Jonathon
<J.Coleman at liverpool.ac.uk <mailto:J.Coleman at liverpool.ac.uk> >
Date: Monday, 8 July 2024 at 18:21
To: Jan Boissevain <jgboissevain at comcast.net
<mailto:jgboissevain at comcast.net> >, button at hep.ph.liv.ac.uk
<mailto:button at hep.ph.liv.ac.uk>  <button at hep.ph.liv.ac.uk
<mailto:button at hep.ph.liv.ac.uk> >
Subject: Re: [BUTTON] Tank scaffold placeholder design


Caution: This email originated from outside of the University. Do not click
links or open attachments unless you recognise the source of this email and
know the content is safe. Check sender address, hover over URLs and don't
open suspicious email attachments.

Hi Jan, 

 

Thanks for doing this. It would be good to get a comment from the Boulby
staff to see how workable this would be. 

 

Thanks,

Jon 

 

From: button <button-bounces at hep.ph.liv.ac.uk
<mailto:button-bounces at hep.ph.liv.ac.uk> > On Behalf Of
jgboissevain at comcast.net <mailto:jgboissevain at comcast.net> 
Sent: 08 July 2024 17:11
To: button at hep.ph.liv.ac.uk <mailto:button at hep.ph.liv.ac.uk> 
Subject: [BUTTON] Tank scaffold placeholder design

 


Caution: This email originated from outside of the University. Do not click
links or open attachments unless you recognise the source of this email and
know the content is safe. Check sender address, hover over URLs and don't
open suspicious email attachments.

Hi

Here is a link to a 3D representation of my current model:
https://autode.sk/3XTJKVJ   This link should work with any browser on any
computer.  The step translation is available if you click on the "download"
button.

I am assuming that a scaffolding vendor will be identified and that the
design will get advanced working with this vendor so that safety and
certification issues can be resolved.

Jan

     

 

Jan Boissevain

JG Boissevain Design

2905 Vista Bonita, Santa Fe, NM 87505

505-577-2789

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://hep.ph.liv.ac.uk/pipermail/button/attachments/20240709/5ae6a20b/attachment-0001.html>