*-- Author : Stephen Burke SUBROUTINE FFPCEL(XY,JFT,ICELL,DRIFT) *-----------------------------------------Updates 13/03/92------- **: FFPCEL 30205.SB. Only call UGTBNK when run number changes *-----------------------------------------Updates 13/02/92------- **: FFPCEL 30205.SB. ERRLOG error numbers changed. *-----------------------------------------Updates 07/02/92------- **: FFPCEL 30205.SB. Remove unused FKMEAS sequence. *-----------------------------------------Updates 24/01/92------- **: FFPCEL 30205.SB. ERRLOG message format changed. *-----------------------------------------Updates---------------- ********************************************************************** * * * Calculate a planar cell number from a position * * * * Returns ICELL = -1 if JFT is invalid * * * ********************************************************************** DOUBLE PRECISION XY(2),PHI DIMENSION FGAP(75) SAVE FGAP,IRUN *KEEP,BCS. INTEGER NHROW,NHCOL,NHLEN PARAMETER (NHROW = 2, NHCOL = 1, NHLEN=2) INTEGER NBOSIW PARAMETER (NBOSIW=1000000) INTEGER IW(NBOSIW) REAL RW(NBOSIW) COMMON /BCS/ IW EQUIVALENCE (RW(1),IW(1)) SAVE /BCS/ *KEEP,BOSMDL. C ------BOSMDL LOGICAL BEGJOB,ENDRUN,BEGRUN,REVENT,ENDJOB,OTHDAT COMMON/BOSMDL/BEGJOB,ENDRUN,BEGRUN,REVENT,ENDJOB,OTHDAT, + LCCRUN,NCCRUN,NEVENT, + IHA,IBS,IDB,IDATEL,LUP,ISN,JSN SAVE /BOSMDL/ C ------ *KEEP,FKNPL. CHARACTER*5 CKDBG PARAMETER (CKDBG='FKDBG') PARAMETER (NPL=72) LOGICAL LTRUE,LFIRST,LTRPL,LTRPLD DOUBLE PRECISION TRUE,RTRUE,CHITRU,SPRO,CPRO,SFIL,CFIL &, SSMT,CSMT,SSMTR,CSMTR,DPRO,CBPRO,QPRO,QGAIN &, RPRO,CRPRO,RFIL,CRFIL,RSMT,CRSMT,CHIFIL,CHISMT * * Per-track values can go in H1WORK; note that LTRUE and LFIRST must * be set at least per event. * * This is about 36k words long; the remaining common blocks are * about 3.6k in total. Some of this could be in /H1WORK/, but the * blocks would have to be reorganised. * COMMON /H1WORK/ * /FKPROJ/ & SPRO(5,NPL),CPRO(5,5,NPL) * /FKFILT/ &, SFIL(5,NPL),CFIL(5,5,NPL) * /FKSMTH/ &, SSMT(5,NPL),CSMT(5,5,NPL) &, SSMTR(5,NPL),CSMTR(5,5,NPL) * /FKINT/ &, DPRO(5,5,NPL),CBPRO(5,5,NPL),QPRO(5,5,NPL) &, QGAIN(5,5,NPL),IAPROX,LFIRST * /FKRSID/ &, RPRO(2,NPL),CRPRO(2,2,NPL),RFIL(2,NPL) &, CRFIL(2,2,NPL),RSMT(2,NPL),CRSMT(2,2,NPL) &, CHIFIL(NPL),CHISMT(NPL) * /FKTRUE/ &, TRUE(5,NPL),RTRUE(5,NPL),CHITRU(NPL),LTRUE * /FKDBG/ &, LTRPL(NPL),LTRPLD(NPL) *KEEP,FFSTEE. PARAMETER (NFT=72) LOGICAL LRISV,LWMAP,LGRAPH,LTRUTH REAL DSX,DSY,DSQOP,DSTTH,DSPHI,PMCUT,PCUT,CHPCUT &, QOPMAX,THEMAX,RFTMIN,RFTMAX,CEMAX COMMON /FFSTEE/ DSX,DSY,DSQOP,DSTTH,DSPHI &, PMCUT,IDIAG,JPLRSV,LRISV,LWMAP(NFT),JPLMAX &, IRP(NPL),JPLFT(NPL),JFTPL(NFT) &, LUNGKS,IWKGKS,IDGKS,LUNHB,LUNGKM,IWKGKM,IDGKM &, LGRAPH,LTRUTH,IHFF,IHFK,ISRJCT,PCUT,CHPCUT &, QOPMAX,THEMAX,RFTMIN,RFTMAX,CEMAX *KEEP,FKPIDP. DOUBLE PRECISION PI,TWOPI,PIBY2 PARAMETER (PI=3.141592653589793238) PARAMETER (TWOPI=PI*2.0D0,PIBY2=PI/2.0D0) *KEND. DATA IRUN/-999999/ ********************************************************************** ICELL = -1 IF (IRUN.NE.NCCRUN) THEN * Get geometry bank CALL UGTBNK('FGAP',INFGAP) IF (INFGAP.LE.0) THEN CALL ERRLOG(341,'S:FFPCEL: Bank FGAP not found') RETURN ENDIF IRUN = NCCRUN CALL UCOPY(RW(INFGAP+1),FGAP,75) ENDIF IF (JFT.GE.1 .AND. JFT.LE.12) THEN KMOD = 0 ELSEIF (JFT.GE.25 .AND. JFT.LE.36) THEN KMOD = 1 ELSEIF (JFT.GE.49 .AND. JFT.LE.60) THEN KMOD = 2 ELSE RETURN ENDIF * Orientation and wire number KORI = MOD(JFT-1,12)/4 KWIRE = MOD(JFT-1,4) * NB The format of FGAP is hard-coded here W0 = FGAP(7) DW = FGAP(8) INDMOD = 31 + 5*(3*KMOD + KORI) PHI = FGAP(INDMOD+3) - PIBY2 CPHI = DCOS(PHI) SPHI = DSIN(PHI) STAGG = FGAP(INDMOD+4) * Cell number and drift (NB check stagger!) W = CPHI*XY(2) - SPHI*XY(1) WCELL = W - W0 + DW/2. - STAGG*(-1)**KWIRE KCELL = WCELL/DW IF (KCELL.LT.0 .OR. KCELL.GT.25) RETURN DRIFT = WCELL - KCELL*DW - DW/2. * Adjust cell number for split cells IF (KCELL.GE.10 .AND. KCELL.LE.15) THEN R = CPHI*XY(1) + SPHI*XY(2) IF (R.LT.0.) KCELL = KCELL + 6 ELSEIF (KCELL.GT.15) THEN KCELL = KCELL + 6 ENDIF * Cell number ICELL = 384*KMOD + 128*KORI + 4*KCELL + KWIRE RETURN END *